Known as odorless and highly harmful, radon is a naturally radioactive gas that may be present around your home. That is because Columbus, Ohio, has a relatively high presence of radon, which is alarming. According to the Ohio Department of Health report, out of the 53 of Ohio’s 88 counties fall under EPA zone 1. And these are areas with maximum potential for radon exposure.
So, what is the solution to minimize the prevalence of radon inside your home? As an answer, companies are offering to do radon mitigation in Columbus, OH, aiming to reduce radon levels inside houses and well-water. And this article will walk you through all you need to know about radon mitigation noblesville in.
What Is Radon Mitigation?
The need to reduce the prevalence of radon is crucial for a healthy environment. As such, residential radon mitigation summit county co is a process used to reduce radon concentration in buildings. And the aim is to reduce the inside radon level as low as possible.
Radon gas is produced by the breakdown of uranium in soil, rock, and water. And for these reasons, it is equally can be present in your well-water.
Radon is drawn inside because of the lower air pressure in your home than in the soil around your home’s foundation. Hence, companies offering to do radon mitigation in Columbus, OH, is essential for every household due to the high levels of radon gas.
Your home’s foundation type can help determine the radon mitigation system that will work best after installation. And you can get in touch with professionals who can run a diagnosis by conducting tests.
How Does Radon Mitigation System Work?
The installation of a radon mitigation system helps draw out and reduce the radon concentration in your home. Meanwhile, the functioning of a radon mitigation system is as follows:
- The system uses a fan to constantly pull air through the soil and exhaust it through the pipes.
- The pipe discharges the air outside through windows and openings either running outside or inside.
- Once the air is forced out, any cracks and gaps are sealed to limit the flow of radon.
Different Techniques of Radon Mitigation
There are several methods or techniques through which a professional will be able to operate a radon mitigation system in your home.
Some radon techniques work in preventing radon from entering your home, while other methods ensure to reduce radon levels inside your home. Although, the best technique is to avoid it entirely from entering.
So, let’s take a look at some of the standard radon mitigation methods.
The soil-suction method of radon mitigation prevents radon from entering your home. This is done by drawing the radon from the soil below your home and exhausting it through a pipe or multiple pipes.
Active Sub Slab Suction
Under the active sub-slab suction method, the mitigation relies on at least one or sometimes more suction pipes. These will be inserted through the floor slab and in the rock which is crushed or soil below, and this is one of the most common radon mitigation methods.
Passive Sub-Slab Suction
This is the same as the active sub-slab suction method, except that this method relies on natural pressure and air currents instead of a fan to suck the air from underneath. As such, this method is generally not very operational in reducing radon levels inside houses.
Drain Tile Suction
Drain tile suction uses a pipe that penetrates the drain tile and exhausts the soil gases outside the house. Suction through these pipes is very effective in reducing radon levels.
If you’re looking for radon mitigation, you can go through the points mentioned above to get in touch with an expert or professional. They can best diagnose your home and help you understand which system to install for optimum effect.